Dead Soft Flat 4.6m Spool Orthodontic Fixed Retainer Wire Lingual Retainer Wire 60"

Dead Soft Flat Ortho Lingual Retainer Wire - 60" - Spool/ Roll/ Strips Ortho Fixed  RETENTION wire 

 Features:
1.Bonded to the lingual surface, this is unobtrusive, aesthetic.  
2.Flat Lingual Retainer Wire is ideal for maxillary and mandibular bonded lingual retainers.
3.Will not fray when cut, can be bonded into place using any type of adhesive.
4.Flat Lingual Retainer Wire is used to make permanent fixed lingual retainers following orthodontic treatment.
5.The retainer wire features a very thin rectangular shape that can be adapted with no occlusal interference while ensuring patient comfort.
6.It prevents inadvertent tooth movement associated with active force wires.
7.It could be used right away in the dentist's office on the patient's teeth and there is no need for additional laboratory adjustments or precautions.
8.Nothing can secure the teeth positioning after the orthodontic treatment better than the Flat Lingual Retainer Wire.

Usage method(As shown in the figure):

1. Apply an etchant on all these teeth, wash the teeth and dry.
2. Floss need to be done between all the 6 teeth.
3. The wire that you have can be shaped according to the patient's mouth size;Then move floss buccally over from the backside of dental model.
4. Apply composite on all these surfaces, light curing and attach the wire.
5. Pull the floss from one direction buccally and take it out.
6. Make sure that the patient's tongue is not being cut by any sharp surface, and there should be no high spots.

Product specification: